Search

  • USS Full HD Monitor

    Designed for Latitude, Horizon and Meridian clients, the USS monitor delivers brilliant display quality at Full HD resolution, making it an ideal choice for a complete FLIR solution.

  • FLIR TI BPL3

    This interface connects zone outputs from BPL3 sensors* and/or Power Line sensors to a controller, providing power and communications to BPL3 sensors and/or PL sensors. It also connects the PC to BPL3 sensors and/or PL sensors for system configuration and viewing
    .*BPL3 Sensor(s): ThermiCam AI, TrafiCam AI, TrafiSense AI, LaneCom T, LaneCom V

  • Large eyecup (T130531ACC)

    Soft eyecup for the viewfinder on the camera.

  • Heat Shield (T197482)

    Heat shield for the FLIR GF309.

  • Macro mode for 24° lens (T199609)

    Macro mode software option for T500-Series and T800-Series cameras with a 24° lenses; 50 µm (640 resolution), 71 µm (464 resolution), or 101 µm (320 resolution).

  • Extech CG206

    Dual technology provides automatic recognition for ferrous and non-ferrous substrates without having you guess the material. Allows for quick, one-handed operation, non- destructive measurement of the coating thickness on various surfaces.

  • Extech CG204

    The Extech CG204 is a portable meter designed for non-invasive coating thickness measurements with automatic recognition of ferrous and non-ferrous substrates. The tester uses dual technology to indicate ferrous (magnetic induction measurement) and non-ferrous (eddy current measurement) substrates. It features single and continuous measurement modes as well as direct and group working modes, 400-reading memory storage, and user-programmable high/low alarms. The CG204 comes with two AAA batteries, USB cable, software, calibration iron, calibration aluminum, precision standards, pouch case, and user manual.

  • Ax5 Accessory Starter Kit (T199356)

    The FLIR Ax5 accessory starter kit consists of the following items: T911183, Gigabit PoE injector 16 W, with multi-plugs, T127605ACC, Cable M12 Pigtail, T951004ACC, Ethernet cable CAT6, 2 m/6.6 ft.

  • DH-390 Pendant Mount Kit

    Mounting arm with pendant mount shroud

  • AC Current Line Splitter (TA55)

    Provides easy and safe measurements of current and voltage from two or three wire outlets. Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground) for accurate current measurement. Dual ranges (x1 and x10) for higher resolution on low-amperage readings. Built-in recessed voltage testing inputs.

  • USB 2.0 A to USB Type-C cable (T911631ACC)

    This cable is used to connect the infrared camera with a computer, using the USB protocol.

  • Wall Mount Assembly (500-1123-00)

    Mount to install an F series network-ready fixed mount thermal imaging camera or a FLIR A3xxf series against a wall.